Hi,

     Anyone can explain Hyperlink in WWI template??  How it would be useful for creating document templates ??

Hi,

I've enclosed 4 attachments relating to CBGL_MP01 transaction,

I have created 2 new labels - 1 for ZROH and the other for ZPAC.

Snip 1 relates to the ZROH on PPS and while in the Label Print transaction and selecting the specific label, on the bottom right of the Label Print transaction, the Net Weight field is enabled which is as required.

However, on Snip 2, this field isn't appearing. This is also the case for Snip 3 which relates to ZPAC created both in PPS & PRD.

Initially I considered it could either be the Label Template and Generation Variant setup but I don't think this is the case.

Is it data related at all? If so, where should I look to enable the Net Weight outputs to appear in CBGL_MP01, please? Thanks a lot.

Maria

Hi, the DG profile indicator can be set as check/document relevant or not. Our Company only procures products for consumption. If I understood correctly that the standard DG check and documents functionalities are mainly for SD, is it correct?

Hello Experts ,

Working on MSDS maker , I was having hard time to connect msds maker to sap ? Can this be used online or offline ?

Hello Experts ,

I tried to connect OCC to sap for loading spec data into sap directly but it does not reach whenever you try to use connect option in OCC .

Hi all,

I have enhanced the standard Auth Check BAdI BADI_EHHSS_INC_EXT_AUTH_CHECK for EHSM. Works like a charm.  But I just got another requirement and thought maybe someone else has done this before.

Right now, I have it set up so people with out the correct access can only view incidents.  Is there a way to use the BAdI to completely hide an incident when a user clicks on it?

Hope this makes sense.

Cheers,

Kevin

Hello All,

I am new to SAP EHSM (SAP Version - 3.0) and I have a requirement to hide some tabs or fields based on the custom access levels which has been added in domain - EHHSS_INC_ACCESS_LEVEL_CODE as suggested by SAP.

Could you please suggest or can you please share the steps which you have done it.

Enhanced the BADI - BADI_EHHSS_INC_EXT_AUTH_CHECK from SPRO.

From here I am unable to proceed further. Little urgent. Please help.

Thanks,

Yerukala Setty

Hi Experts

I am facing issue while generating reports from cg02..i created reports and the reports in cg50 are in RR status and the status is not changing.

I checked WWI serever it is up and running.and no issue with batch job as well everything is fine but still pacing error in event log of CGSADM txn.

Here iam sharing the screen shots

Please help me in this

thanx in advance

Regards

SAntoshi

Introduction

EHS classic is quite flexible. You can extend it easily. Some options are mentioned in: Customer Exits in SAP EHS MANAGEMENT

One option to enhance EHS is using Rule Sets or Secondary Data Determination. By using these options you can speed up the data management.

Using these options you can support maintenance actions: refer to: How to deal with legal/regulatory changes (using SAP EHS MANAGEMENT)?

In EHS FORUM discussion is coming up on low level for use of rule sets and similar options. This is "surprising" as these tools and techniques really facilitate the data handling.

As you can see in EHS Expert WWI Installation SAP R/3 Enterprise - Toolbox for IT Groups the installation topics  might be not understood very well.

In Scope

I will try to give an high level overview of the two options more from point of view of business.

Out of Scope

I will not provide the details.

Secondary Data Determination

May be check: Secondary Data Determination - Basic Data and Tools (EHS-BD) - SAP Library as a starting point in reading.

If you read cross the term "Secondary Data Determination" might not be a good one. E.g. This option is used to integrate OCC or other tools which can be used to "upload" data. This is more or less a "data import". One other subtype is the "Rule Set" integration and the next one would be the use of a "customer" specific exit.

Therefore you could generate this list in context of the term "Secondary Data Determination":

• it can be used to do data loads (as with OCC)
• it can be used to execute Rule Sets (with the use of EH&S Expert)
• it can be used to incorporate completely company specific programming
  

Long time ago SAP provided some "Secondary Data Determination" "programs" as part of EHS. This is not supported any more.

Rule Set

As always a good option is to start with SAP help. I will do slightly different.

Therefore check these links:

So if you "google" you find some useful results (and not only on the SAP help page).

From technical point of view. Rule Sets and Secondary Data determination option are "only" special cases of an exit. They are "default" ones (which are always present in CG02; that means they are part of the SAP menue (without content; the content need to be customized)); Other exits need to be prepared to show up in CG02 (refer above to the document mentioned there).

SAP help starts with: EH&S Expert - SAP Library

So as you can see: We have to differentiate between "SAP EHS Expert" and "SAP EHS Easy Expert". In most cases the "Easy Expert" can only be used for "very" simple "calculations" of  something. On daily business normally this will not be enough. In reality the "Easy Expert" approach is "to simple" incomparison to the "complex" rules you need in daily business(e.g. refer to SAP online help: EH&S Easy Expert - EH&S Expert - SAP Library).

Using rulesets is one approach to speed up in maintenance of data and can help in "Change Management" (after regulatory data has changed).

What are the cons: you need to understand the set up of EHS Server and how to define the rule (including mapping etc. etc.). With EnhPack 3 a lot of performance optimizations have been done. Please read cross the SAP help. On high level: the performance critical step is the reading of the data; this is "improved" in EnhPack 3 (together with other improvements as well).

Keep in mind: to enhance rules sets in prod you need to execute a lot of steps (which are in regrads of complexity etc. may be on level of: how to distribute a WWI layout from dev to qual to prod).

If you do not want to "learn" EHS Expert you need to buy content from a data provider. Prerequisite is: you should not ! have changed the STANDARD tree. You need to use standard SAP data model (with rating, validity areas etc. etc. etc.). Additional prerequisite:

- you need to use the same UOMs as described by the service provider

- you need to use the same phrases (or you need to map them)

Any rule set delivered (according to my knowledge) assume that you are using STANDARD SAP tree without any customer enhancements.

Here a small list of threads:

As you can see. The interest in EHS Expert Server is really limited.

OCC Set up

OCC is a tool which can be used to import data. E..g. refer to these links:

EH&S Open Content Connector - Basic Data and Tools (EHS-BD) - SAP Library

IMPORTANT NOTE: The old "DataEditor" as deliverd by TechniData is now part of OCC (on high level). You can now use OCC to upload specification data and phrase data

Did you know that regarding there is an US patent in place? I identified two patents:

http://www.google.com/patents/US7680803

http://www.google.pl/patents/US20050283374

May be read as well: http://patentimages.storage.googleapis.com/pdfs/US7680803.pdf  and US20050283374.pdf

(which are pdf files representing the US patents).

E.g. http://www.google.com/patents/EP1852796A1?cl=en could be of interest too.

OCC is a tool to import data as part of an "XML"data stream and in the current version you can use "text oriented files strcutures" as well . In most cases you use it to upload "regulatory data" provided from

a data provider. In most case not more than 10 persons in a company need to do the upload (and therefore need the knowledge and corresponding skills to do so). So there is not a need to install OCC on any client.

May be check as well: Examples of Data sharing demands in SAP EHS Management using XML

Here a small list of threads discussing OCC:

As you can see. The interest in using OCC is limited.

DRAFT VERSION; WILL BE UPDATED FROM TIME TO TIME

Hi,

A user from my company told me lately that the search help for a substance in a composition value assignment was acting strange. I try to describe the behavior.

1st situation

You have a selection list of only 1 specification in CG02. Next you open a composition VAT for adding an additional specification in the composition. If you don't know the specification, you can use a search help. Via for example an identifier you will find all the specifications that are relevant according the search filter. This is OK.

2nd situation

You have the situation that you have a list of 2 or more specifications in CG02. You select one of the specifications and open a composition VAT again. Now when you are using the search help for finding the correct specification to add in the composition, the system only shows specifications from the initial list in CG02. Any other specification seems to be filtered out already. This behaviour is not what I expected. I expected the same behavior as described in the 1st scenario: showing all available specification using only the filter of the search help screen.

I must admit that I never checked and have seen this before and maybe it is standard behavior of SAP (although it looks strange to me). Can anyone confirm that they have the same behaviour  in their systems or that this is really a bug in our system.

Thanks for any answer,

Regards,

Paul